What to Consider When Choosing a Laser Cutter

When discussing the latest tech innovations, there is no way to have a conversation without discussing laser technology. While quite a bit about this technology can be found by visiting boss laser on YouTube, there is also some information below. Please keep reading to learn more about laser cutting technology, how it works, and the benefits it offers here.


As mentioned above, modern laser cutting technology can be used in several fields. It ranges from medicine and electronics to automotive, healthcare, design, defence, and more. The most prominent application of a laser cutter is to cut all types of metals. There are no restrictions. These machines can be used for cutting iron, steel, nickel, aluminium, brass, tungsten, and more. It all does this providing a nice finish and high levels of accuracy, which means the end product meets a designer’s needs.

There is an interesting application offered by laser technology that is worth mentioning. It is now used in surgical wards and is slowly replacing many metallic cutting tools, such as the scalpel. Today, it can be used for vaporizing human cells and tissues. This type of operation is hazardous, and they demand extreme caution and high levels of precision.

Specifications of the Laser

A laser beam’s diameter usually ranges between 0.1 mm to 0.3 mm. The power of these beams ranges between one and three kilowatts. The power of the machine in question is determined by looking at the substrate material. If someone needs to cut iron or steel, they may get the job done using one or two kW. However, for metals such as aluminium or copper, which have higher conductive and reflective properties, it may be necessary to find a powerful beam of at least six kWs.

The Laser Resonator

The laser resonator is essentially the powerhouse of the laser cutting machine. It is designed with a glass tube, along with two mirrors that are placed facing one another. The tube includes gases, such as helium, nitrogen, hydrogen, and CO2. The next important component is the diodes, which will charge the mix of gases. The charging of the gases will emit energy, which is seen in the form of a laser.

The Cutting Head

Once the resonator emits the laser beam, it will go in several directions after it is reflected away from the mirrors, which have been placed inside the machine. When it makes it to the cutting head, the laser beam is focused and magnified to the specified point of interest. The cutting heat will transform the laser beam into what will cut through the material or what will engrave it.

Selecting the Right Laser Cutter

There are more than a few factors to consider when it comes to finding the right laser cutter. Being informed is the best way to ensure that the desired results are achieved and that no serious issues arise. The right laser cutter will provide the outcome for a project or job and minimize issues related to cutting or engraving.

Leave a Comment